Farm with corn mill and chicken feed, acro-industrial operations, laboratories and also as a collection center.

In front of the weight and dimensions, road via Las Tablas, Corregimiento de El Espinal, district of Guarare, province of Los Santos.
It has an area of 2 hectares plus 7652.50 square meters. It has a flat surface above street level located among other lots, we highlight that the lot of land, in addition to the main front, has a secondary front to a back road on the way to Las Lajitas.

*We emphasize that the land in the front part is slightly affected by the widening of the street*

-The improvements consist of a single-story industrial building for the manufacture of animal feed.
-Inside the building there are some buildings, used as an administrative office, toilets and an area used as a dressing room; In addition, an office is being built, another office and a kitchenette are finished.
-Reinforced concrete floors
-Walls with steel columns (10 units), reinforced concrete bases. In the new offices, the walls are made of metal framework and gypsum sheets.
-Windows with wind aeration system, located on the roof, fixed glass windows in the new offices.
-Roof with steel beam structures and galvanized steel carriages, 26-gauge galvanized zinc roof and thermal insulating ceiling, in one of the new offices with suspended ceiling
-Three doors of which two are rollers and a small door, fixed glass doors in an aluminum frame in one of the new offices and kitchenette
-Without joinery, reinforced coating in reinforced enameled zinc sheets

*ALL THE STEEL STRUCTURE IS SUPPLIED BY HOPSA*

PROPERTY VALUE $1,051,178.15 and RENT $4,500.00

Feed Factory Equipment

• A horizontal mixer type Ribbon - Blender brand WASLET; capacity, powered by a 12HP electric motor, with its steel structure and other normal accessories for its operation.
• A WASVELT brand hammer mill with a capacity of 1.5 ton/hour, driven by a 20hp SIEMENS electric motor with spare loose 4mm fibers, a set of 36 hammers and 6 damping rubbers.
• A metal pre-grinding hopper
• A 2.3x2.00 meter manual race cutting computer.
• An endless feed conveyor with a SEW 1hp-0.75Kw motor reducer, series with 1 pillow block bearings.
• A 7”x5” stainless steel chute with magnet in Veodymiun
• A 0.96 x 0.70 x 1.17 meter mill decompression hopper with a 0.35 x 0.35 meter gate.
• A hopper for loading flour consists of a grid, a side protector, a hopper and a vertical racer for normal use.
• A (disassembled) bucket elevator, with its SEW 1.1Kw R-37DT9052 motor reducer, N°, with hollow flywheel and transmission – chain sprocket 60B16-60B16.
- In addition, three legs of different heights, a base with a hollow steering wheel and a tension system, a 5” ENL band, 3 canvases with a length of 15 meters, 120 4x3” buckets (scoops).
• A pre-mix hopper consisting of a straight part, a conical part with a peephole and an inspection hatch.
• A racer of 0.30 x .50 meters
• A main control board for the plant with 22 accessories which control all the equipment, brand SIEMENS and TELEMECANIQUE.

Additional Equipment

• Two funnel-type silos built in galvanized steel, mounted on a structure of the same material, with a capacity of 600qq each.
• A two-level grain cleaning machine, complete with its electric motor and other accessories.
• A horizontal mixing machine, complete with all its accessories mounted on a steel structure.